Filter
Top Products
Polycom RSS 2000 User Guide
5-5
operation.
# ClearArchives
Please input administrator's password to continue:
Enter the correct administrator password after the prompt and press Enter;
the system will start to delete all video files on the RSS 2000. The following
information will be shown after all files have been successfully deleted:
Clear all archives command send out OK.
Imageversion
This command is used to view the version information of current image file.
Input imageversion after the prompt “#” and press Enter button to
implement this operation.
# imageversion
Current image version(0):
ResetConfig
Enter "ResetConfig" after the prompt "#" and press Enter to restore the RSS
2000's default configuration. Please enter the administrator password now.
# ResetConfig
Please input administrator's password to continue:
Enter the correct administrator password after the prompt ":" and press Enter.
The RSS 2000 will begin resetting.
Prepare to reset configurations...
Resetting configurations now...
Reset configurations OK.
The RSS 2000 must be restarted in order for the new settings to take effect.
The RSS 2000 will now be restored to the default configuration. The IP
address will be: 192.168.1.254, the subnet mask: 255.255.255.0, and the
gateway: 192.168.1.1.
The user can now use the serial port to set the RSS 2000's IP address.