Filter
Top Products
Chapter 4 -
4-4
Onscreen User Interface (UI) – Archive Playback
Figure 4-4 Enter the quick access code
Use the remote control's number keypad to input a file's quick access code,
and press "#" when finished.
If a PIN code has been set for a recording file, the system will prompt the
user to enter the PIN code after the quick access code has been input.
If no PIN code has been set, the system will immediately begin to play back
the file after the quick access code has been entered.
Quick play (with RSS 2000 registered to a gatekeeper)
If an endpoint has viewing rights for a video, a user can use the remote
control's number keypad to input the RSS 2000’s E.164 alias + the video's
quick access code to immediately play the file without needing to browse the
menu. For example, if the RSS E.164 alias is 1234, and the desired video file’s
quick code is 567890, the user could dial 1234567890 to view the video
without navigating through menus.
Quick play (with RSS 2000 not registered to a gatekeeper)
Call the RSS 2000's IP address and input the quick access code in the
endpoint's extension field (the endpoint must support the extension number
field) to view the video file without navigating through menus.
When playing back a video, press "*3" to stop playback.
Sorting Archives
The RSS 2000 provides Archive List sorting functions in order to help users
find desired videos in the archives. Use the remote control to select "Archive
sort options" on the "Video Playback" menu, and confirm to enter the archive
sorting interface, as shown below.