Filter
Top Products
Chapter 4 -
4-2
Onscreen User Interface (UI) – Archive Playback
Video Viewing Rights
Select "Archive List" from the "Play Video" menu. This opens the interface
shown in
Figure 4-2, which displays a list of the videos that the endpoint can
view.
When the "Viewing rights" option of archive is set to "Allow all," or if set to
"Group list" and the connected endpoint is a member of that group, the video
will be included in the available "Play Video" list. Please see
Viewing rights
settings
for more information on video viewing rights. If the RSS 2000 has
clustering enabled, the Archive List will show recording files stored on other
devices in the cluster. Please see
Clustering settings for more information on
clustering.
Use the remote control to select the desired video from the Archive List.
Information concerning the highlighted video file will be displayed below
the list, including the video protocol, quick access code, and name of the
device storing the file. If the video can be previewed, you will see a preview
of the video highlighted by the cursor in the small preview window in the
lower right corner of the screen.
Figure 4-2 Video information and preview
Videos on the RSS 2000 Archive List can be previewed if they meet the
following four conditions:
• The archives were recorded in resolution lower than SD (Standard
Definition).
• The video file is stored on an RSS 2000 the endpoint is connected to.
• The video file preview function has been enabled in the RSS 2000
settings. Please refer to
System settings concerning the preview
function.
• The highlighted file's video algorithm is supported on the endpoint.
• The number of current H.323 connections does not exceed 2.
Highlight a video and select it; the chosen video will be played back. When
playing back, the user can use the "*3" or any FECC arrow buttons on the
remote control to stop playing.