Filter
Top Products
Chapter 5 -
5-4
Appendix A – Terminal Setting and User Commands
quit Logout.
#
Show system information
Enter “show" after the prompt "#" and press Enter to display system
information:
# show
Physical Memory:1039836 KB Intel(R) Pentium(R) 4 CPU 2.80GHz
LAN1: IP: 172.21.99.43 MASK: 255.255.224.0
GW: 172.21.99.1 MAC: 00:90:FB:06:A0:80
RSS 2000 Service is RUNNING
Telnet settings
Enter "telnet on" or "telnet off" after the prompt "#" and press Enter to enable
or disable Telnet.
Entering "telnet off" disables the RSS 2000's telnet function. The user can now
only use the serial port to perform system setting tasks.
# telnet on
Set Telnet ON ok
Entering "telnet off" disables the RSS 2000's telnet function. The user can now
only use the serial port to perform system setting tasks.
# telnet off
Set Telnet OFF ok
FTP settings
Enter "ftp on" or "ftp off" after the prompt "#" and press Enter to enable or
disable the FTP function.
Entering "ftp on" enables the RSS 2000's FTP functions. Those users defined
on the RSS 2000 can now use the FTP protocol to download video files on the
device.
# ftp on
Ftp service enabled. You need restart media service to make it
valid.
Entering "ftp off" disables the FTP function.
# ftp off
Ftp service disabled. You need restart media service to make it
invalid.
ClearArchives
This command is used to delete all video files on the RSS 2000. Enter
"ClearArchives" after the prompt "#" and press Return to implement this