Ricoh 3030 All in One Printer User Manual


 
Stored Print
95
4
Stored Print
Use this function to store a file in the
machine, and then print it from the
computer or the machine's control
panel later.
Limitation
A Stored Print file cannot be stored
if:
the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine
is over 100. (The maximum num-
ber varies depending on the vol-
ume of data in files.)
the file contains over 1,000 pages.
sent or stored files in the machine
contain over 9,000 pages in total.
Note
If a Stored Print file has not been
stored properly, check the error
log on the control panel (see p.105
“Checking the Error Log”).
Even after you turn off the ma-
chine, stored documents remain.
However, the [Auto Delete Tempo-
rary Print Jobs] or [Auto Delete Stored
Print Jobs] settings are applied first
(see p.128 “System”).
If the application has a collate op-
tion, make sure it is not selected
before sending a print job. By de-
fault, Stored Print jobs are auto-
matically collated by the printer
driver. If a collate option is select-
ed from the application's Print dia-
log box, more prints than intended
may be produced.
Printing a Stored Print File
The following procedure describes
how to print a Stored Print file with
the RPCS printer driver. For informa-
tion about how to print a Stored Print
file with the PostScript 3 printer driv-
er, see Postscript 3 supplement includ-
ed as a PDF file on the supplied CD-
ROM.
Limitation
Applications with their own driv-
ers, such as PageMaker, do not
support this function.
If you are using Mac OS X, you
need Mac OS X v10.2 or higher to
use this function.
Reference
For details about setting printer
drivers, see Printer Driver Help.
You can also print or delete a
Stored Print file from Web Image
Monitor. For details, see Web Im-
age Monitor Help.
Note
The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.82
“Selecting the Initial Print Job
List”).
A Configure Stored Print in the
printer driver’s properties.
Reference
For details about configuring
the printer drivers, see the rele-
vant Help files.