Filter
Top Products
Sending Scan Files by Scan to Folder
34
3
G Specify the destination folder.
You can specify the destination
folder in the following ways:
•
Select it from the destination list.
• Specify its registration number.
• Directly enter the path for the
folder of a client computer on
the same network.
• Directly enter the path for the
folder on the FTP server.
• Directly enter the path for the
folder in the NDS tree or on the
NetWare server.
• Select a folder on a network
computer.
• Select a folder in the NDS tree or
on the NetWare server.
Note
❒ Destinations in the destination
list and registration numbers
must be registered in advance
in [System Settings]. For details,
see “Registering Addresses and
Users for Facsimile/Scanner
Functions”, General Settings
Guide.
❒ Depending on the security set-
tings, certain destinations may
not be displayed.
Selecting a destination folder
from the list
A Select the destination folder.
The selected folder is highlight-
ed and also is displayed in the
destination field at the top of the
screen.
Note
❒ If the target destination does
not appear, take one of the
following steps:
• Display the destination by
selecting its initial letter
from the title.
• Display the destination by
pressing [U] or [T].
❒ If a protection code has been
set for the shared folder, a
screen for entering the pro-
tection code appears.
B To select more destination
folders, repeat step A.
Note
❒ To deselect a destination,
press the destination once
more, or press [UPrev.] or
[TNext] to display the desti-
nation in the destination
field, and then press the
{Clear/Stop} key.