Filter
Top Products
Sending Scan Files by Scan to Folder
36
3
❒ Computer and shared folder
names consisting of more
than 12 characters cannot be
displayed.
E Press [OK].
F Enter the user name according
to the setting at the destina-
tion.
Press [Manual Input] to the right
of the user name field to display
the soft keyboard.
Reference
For details about the maxi-
mum number of characters
that can be entered, see p.123
“Scan to Folder”.
G Enter the password according
to the setting at the destina-
tion.
Press [Manual Input] for [Pass-
word] to display the soft key-
board.
H Press [Connection Test].
A connection test is performed
to check whether the specified
shared folder exists.
Note
❒ The connection test may take
time.
❒ You may not be able to press
[Connection Test] right after
pressing [Cancel] during a
connection test.
❒ Though the connection test
was successful, the machine
may fail to transfer the file if
writing authority is lacking
or if there is not enough free
space on the hard disk.
I Check the connection test re-
sult, and then press [Exit].
J Press [OK].
K To enter more destinations, re-
peat steps A to J.
Note
❒
To deselect a destination, press
[UPrev.] or [TNext] to display
the destination in the desti-
nation field, and then press
the {Clear/Stop} key.
❒ To change the path for the
folder that has been entered,
press [Change] on the left side
of the destination field. Enter
the correct path for the fold-
er, and then press [OK].
❒ To check the selected desti-
nations, press the {Check
Modes} key.
Directly enter the path for the
folder on the FTP server
A Press [Enter Destination].
B Press [FTP].