Filter
Top Products
COPYING
çí
2
PROGRAM—STORING YOUR COPY
SETTINGS IN MEMORY
You can store frequently used copy
job settings in machine memory, and
recall them for future use.
❖
❖❖
❖
Storing Your Settings
You can store your settings you
frequently use.
❖
❖❖
❖
Deleting A Program
You can delete a stored program.
❖
❖❖
❖
Recalling A Program
You can recall a stored program.
Note
❒ You can store up to ten programs.
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of a same size,
the paper tray prioritized with the
user tools will be selected first. See
“12. Pap.Tray Priority” of the Sys-
tem Settings.
❒ Programs are not cleared by turn-
ing the power off or by pressing
the {
Clear Modes/Energy Saver
} key.
They are canceled only when you
delete or overwrite them with an-
other program.
Storing Your Settings
A Edit the copy settings so that all
functions you want to store in this
program are selected.
B Press the {
Program
} key.
C Press the [
Store
] key.
D Select the program number you
want to store these settings in
with the <> keys. Then, press
the [
OK
] key.
When the settings are successfully
stored, the m indicator appears.
Note
❒ Program numbers with m al-
ready have settings in them.
❒ If this program number is al-
ready being used, the machine
will ask you if you wish to over-
write it - press the [
Yes
] or [
No
]
key.
231
eed Dial
Program
Clear
Modes
/
Energy Saver
Interrupt
C
ND2R01EE
ND2C0101
ND2C0109