Filter
Top Products
COPYING
çé
2
you for your user codes after the
operation switch is on or the Auto
Reset comes into effect.
❒ To prevent others from making
copies using your user code, press
the {
Clear Modes/Energy Saver
} and
{
Clear/Stop
} keys simultaneously
after copying.
Reference
For setting user codes, see ⇒ P.154
“1. General Features
4
/
4
”.
Auto Start—Entering Copy
Job Settings During The
Warm-up Period
If you press the {
Start
} key during the
warm-up period, the {
Start
} key will
blink, and your copies will be made
as soon as warm-up finishes.
A Make any adjustments to copy
settings during the warm-up peri-
od.
B Set your originals.
C Press the {
Start
} key.
The {
Start
} key indicator alternate-
ly flashes red and green.
Note
❒ To cancel Auto Start, press the
{
Clear/Stop
} key.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
for about two seconds after copying.
Note
❒ To cancel this function, see “06.
Original beeper” in ⇒ P.152 “1.
General Features
2
/
4
”.