Filter
Top Products
RECEIVING A FAX MESSAGE
72
3
Having Incoming Messages
Printed on Paper From the
Bypass Tray
You can have messages sent from
Specified Senders printed on paper
from the Bypass Tray. This is useful if
you need messages printed on a size
of paper not stocked in the paper cas-
sette(s).
Limitation
❒ When the optional Fax Feature Ex-
pander is installed, you can set pa-
per between 128 and 800 mm long
in the Bypass Tray.
Note
❒ Before you can use this feature,
you need to turn on Authorized
Reception (Initial Setup RX set-
tings, P.161
“INITIAL SETUP
RX”
), program the Specified Send-
ers (Key Operator Settings, Special
RX No.) along with the Paper Tray
set to “Bypass Tray”.
❒ When you set paper sizes other
than A4 landscape, B4 landscape
and portrait, A3 landscape and
portrait in the Bypass Tray, specify
the paper size.⇒ P.162
“To set the
Bypass Paper Size”
❒ If the specified paper size and the
size of paper set in the Bypass Tray
do not match, paper jams may oc-
cur and the image may be truncat-
ed.
❒ If you use this feature, Image Rota-
tion is not possible.