Filter
Top Products
KEY OPERATOR SETTINGS
171
7
Note
❒ If the standby display is not
shown, press the
{
{{
{
Fax
}
}}
}
key.
B Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the number for “Key Op.
Settings” using the number keys
and press the
{
{{
{
#
}
}}
}
key within 3
seconds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the number for “Personal
Code” using the number keys.
F Enter the function number for
“Print Pers. Code” using the num-
ber keys.
G Press the
{
{{
{
Start
}
}}
}
key.
When printing is completed, the
display shown in step 4 appears
again.
Note
❒ If you press
[
Cancel
]
before
printing starts, the printing
stops and the display shown in
step 6 appears again.
H Press
[
PrevMenu
]
twice.
I Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
ECM
If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
When ECM is off data transmission
speed shifts down below 14.4 Kbps
and JBIG compression is not avail-
able.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
2
2
2
2
1
1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Auto Reduce/
Book 2-Sided
ND2L01E0