Filter
Top Products
COPYING
éç
2
A Press the {
Sorter
} key until the
Sort indicator (top) is lit.
B To make punch holes, press the
[
Punch
] key.
Limitation
❒ The optional 3000-sheet finisher
and punch kit are required to
use this function (Type 3 only).
❒ You cannot make punch holes
with Rotate Sort.
Note
❒ If you do not make punch holes,
go to Step D.
C Make sure that [
ON
] is selected,
then press the [
OK
] key.
D Enter the number of copy sets
with the {
Number
} keys.
Limitation
❒ The maximum number of sets is
999.
E Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the {
Start
} key.
After all the originals are
scanned, the copies are deliv-
ered to the tray.
Note
❒ The last page should be on
the bottom.
❒ If an original is misfed dur-
ing sorted copying, reset
your originals in the docu-
ment feeder according to the
instruction on the display.
The display will indicate the
number of originals you
should return.
When setting an original on the
exposure glass or in the
document feeder
Reference
See ⇒ P.33 “SADF mode”
A Set the original, then press the
{
Start
} key.
Note
❒ Start with the first page to be
copied.
B Set the next original, then
press the {
Start
} key.
2
2
2
2
1
1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Auto Reduce/
Book 2-Sided
ND2L0101
ND2C0101
ND2C0104