Filter
Top Products
CHANGING LINE TYPE
41
2
CHANGING LINE TYPE
The optional ISDN unit is required to use this function.
This machine comes with a single An-
alog (PSTN) line connection for G3
communication as standard. If you
install the ISDN Unit option, an extra
digital (ISDN) line connection for
both G3 and G4 communication be-
comes available.
When you use G4, press the
{
{{
{
F4
}
}}
}
key
to lit the lamp.
G4 is selected when this key is lit, G3
is selected when it is not lit.
Press the key once to switch between
G3 and G4.
Limitation
❒ Under the operation procedure for
transmission, you can select the
line type if dialing with the num-
ber keys or Chain Dial.
-
--
-
To Switch to G3
If the
{
{{
{
F4
}
}}
}
key is lit, press it once to
switch to G3.
-
--
-
To Switch to G4
If the
{
{{
{
F4
}
}}
}
key is not lit, press it once
to switch to G4.
Limitation
❒ If you select G4 mode, JBIG com-
pression is not available.
-
--
-
Which line is used for G3
transmissions?
ISDN lines can be used for G3 com-
munication as well as G4 communica-
tions, so this machine is set by default
to use the ISDN line for both G3 and
G4 transmissions. If you wish to use
the Analog (PSTN) line for G3 trans-
missions, please contact your service
representative.
Note
❒ When you use G3 with ISDN, you
can set the subaddress.
TX File
Status
01 02 03 04 05 06
F1
F2
F3 F4 F5
D
e
S
u
n
i
ca
ti
ng
Fil
e
Fil
e
Start
Manual RX
TEL
Mode
ND2L04E1
TX File
Status
01 02 03 04 05 06
F1
F2
F3 F4 F5
D
e
S
u
n
i
ca
ti
ng
Fil
e
Fil
e
Start
Manual RX
TEL
Mode
ND2L04E1