Filter
Top Products
ACCEPTABLE TYPES OF ORIGINALS
17
1
• When you set an original on the exposure glass, an original narrower than
about 9.25” is scanned as LT/LG size wide. An original wider than 10.83”
is scanned as DLT size wide. Normally, lengths up to a maximum of 17”
can be scanned (this figure varies slightly depending on the type of origi-
nal). If you select Irregular Scan Area, lengths up to 17” are possible.
-
--
-
Maximum Scan Area
Memory Transmission/Immediate Transmission
• From the Document Feeder (ADF): 297 × 432 mm (W × L)
• From the exposure glass : 297 × 432 mm (W × L)
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A Remove the original and replace it on the exposure glass. Press the
{
{{
{
Start
}
}}
}
key to scan the original again. If the machine still cannot detect the original
size, the following display is shown:
B Press the
<
<<
<
and
>
>>
>
keys to switch the scan size and press the
{
{{
{
Start
}
}}
}
key
again.
Length
width
∼
"9.80 "9.80
∼
"10.79 "10.79
∼
"12.44 "12.44
∼
∼
"9.57 not detected LT
L
LT
L
LG
L
"10.55
∼
LT
K
DLT
L
DLT
L
DLT
L