Filter
Top Products
RECEIVING A FAX MESSAGE
56
3
MEMORY RECEPTION
The machine waits until all pages of
the message have been received into
memory before printing the message.
This method is used with the follow-
ing features:
• Two in one P.38
“Photo”
• Multi-copy when set to multiple
copies P.65
“Multi-copy Reception”
• Reverse Order Printing P.68
“Re-
verse Order Printing”
• Substitute Reception P.57
“Substi-
tute Reception”
• 2-sided Printing (Both Optional
Duplex Tray and Fax Feature Ex-
pander are required) P.65
“2-Sided
Printing”
Important
❒ All the messages stored in memory
are deleted if the power is
switched off for more than one
hour. However, note that if the op-
tional Hard Disk is installed, all
stored messages are not deleted.
❒ If Memory Reception is switched
on, the machine may not be able to
receive large numbers of messages
or messages with a high data con-
tent. In such cases, we recommend
you switch Memory Reception
mode off or add a memory card.
Limitation
❒ The machine may not be able to re-
ceive fax messages when the free
memory space is low.
Note
❒ If the memory free space reaches 0
% during Memory Reception, the
machine can no longer receive the
current fax message and stops
communicating.
Receiver (your machine)
Sender
ND1X00E3