Filter
Top Products
KEY OPERATOR SETTINGS
173
7
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
{{
{
Fax
}
}}
}
key.
B Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the function number for
“Key Op. Settings” using the
number keys and press the
{
{{
{
#
}
}}
}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
E Enter the function number for
“Memory Lock” using the num-
ber keys.
F Switch Memory Lock on or off us-
ing the
<
<<
<
and
>
>>
>
keys and press
OK.
Note
❒ If you press Cancel, Memory
Lock is not switched on and the
display shown in 5 appears
again.
G Press
[
PrevMenu
]
.
H Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
Multistep Transfer
The optional Fax Feature Expander is re-
quired to use this function.
This machine can be used to build up
a multi-step facsimile network that al-
lows messages to be sent via multiple
Transfer Stations and achieve greater
efficiency in processing Transfer Re-
quests.
The following procedure describes
how to program a Transfer Station
number into a Group. Providing this
Group contains the appropriate End
Receiver Information (Group codes),
2
2
2
2
1
1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Auto Reduce/
Book 2-Sided
ND2L01E0
ND1X03E0