Ricoh 340 Fax Machine User Manual


 
SELECTING THE RECEPTION MODE
59
3
SELECTING THE RECEPTION MODE
There are two ways you can set up
your machine to handle incoming
calls:
•Fax mode
Tel mode (handset option or exter-
nal telephone required)
The default setting is Fax mode. You
can change this with the User Tools.
P.203
“Changing the User Parame-
ters”
Fax Mode (Auto Reception
Mode)
When a telephone call comes in, the
machine receives it automatically as a
fax message. Use this setting for a
dedicated fax line.
Telephone Mode
When a call comes in, you have to
pick up the handset or external tele-
phone and decide whether the call is
a fax message yourself. If you hear a
voice, continue your conversation as
you would using a normal telephone.
If you hear high pitched beeps, in-
struct the machine to receive the fax
by following the procedure below.
Use this setting if you wish to share
the line between the fax machine and
a telephone.
-
--
-
Receiving a Fax in Telephone
Mode
This feature needs a User Function
key programmed as
{
{{
{
Start Manual RX
}
}}
}
.
By default,
{
{{
{
F1
}
}}
}
is already assigned
this function. P.164
“ASSIGNING
USER FUNCTION KEYS”
A When the machine rings, pick up
the handset.
B If you hear beeps, press the User
Function key (
{
{{
{
F1
}
}}
}
{
{{
{
F5
}
}}
}
) which
has been programmed as the
{
{{
{
Start
Manual RX
}
}}
}
key.
C Replace the handset. The machine
will start receiving.
-
--
-
Changing from Fax Mode to
TEL Mode
This function also requires the use of
a User Function key. By default,
{
{{
{
F3
}
}}
}
is assigned as the
[
TEL Mode
]
key.
To change the reception mode, press
the User Function key which has been
programmed as the TEL Mode key
(
{
{{
{
F3
}
}}
}
by default).