FO1650U-SPSP
YF
<P=001>
SPECIFICATIONS
Applicable telephone line:
Public switched telephone network
Compatibility:
ITU-T (CCITT) G3 mode
Configuration:
Half-duplex, desktop transceiver
Memory size*:
512 KB (approx. 31 average pages with ECM function off and no
voice mesages recorded, or 24 minutes of voice messages with
no documents in memory)
1 MB add-on available as option
Compression scheme:
MH, MR, MMR
Scanning method:
Flat-bed, solid-state CCD
Resolution:
Horizontal:
203 lines/inch (8 lines/mm)
Vertical:
Standard
98 lines/inch (3.85 lines/mm)
Fine /Halftone
196 lines/inch (7.7 lines/mm)
Super fine
392 lines/inch (15.4 lines/mm)
Recording system:
Thermal transfer recording
Display:
7 x 5 dots, 1 line by 16-digit display
Reception modes:
Auto/Manual/Ans./switching
Modem speed:
14400 bps with automatic fallback to 12000, 9600, 7200, 4800,
or 2400 bps
Transmission time*:
Approx. 6 seconds (memory transmission)
Effective recording width:
8.0" (203 mm) (average)
Input document size:
Automatic feeding:
Width
5.83 to 8.5" (148 to 216 mm)
Length
5.04 to 14" (128 to 356 mm)
Manual feeding:
Width
5.83 to 8.5" (148 to 216 mm)
Length
5.04 to 39.4" (128 to 1000 mm)
Effective scanning width:
8.3" (210 mm) max.
Automatic document feeder:
20 sheets max.
Halftone (gray scale):
64 levels
Contrast control:
Automatic/Dark selectable
Copy function:
Single/Multi-copy/Sort-copy (99 copies/page)
Telephone function:
Standard (cannot be used if power fails)
Power requirements:
120 V AC, 60 Hz
Operating environment:
41 - 95
°
F (5 - 35
°
C), 20 to 80% RH
Power consumption:
Stand-by: 6 W
Maximum: 100 W
Dimensions:
Width: 14.3" (363 mm)
Depth: 19.2" (488 mm)
Height: 7.4" (188 mm)
(Without attachments)
Weight:
Approx. 13.0 lbs. (5.9 kg)
* Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time
for protocol signals (i.e., ITU-T phase C time only).
As a part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
SPECIFICATIONS Spec-1