Filter
Top Products
UX1300U-IPRM
DD
<P=001>
SELECTING THE RECEPTION MODE
Your fax has three modes for receiving incoming calls and faxes:
TAD mode:
Select this mode when you are out and want the built-in answering
machine to answer all calls. Voice messages will be recorded, and fax messages
will be received automatically. ("TAD" stands for "Telephone Answering Device".)
TEL mode:
Select this mode when you are in and want to receive both voice calls
and fax messages on the same line. You must answer all calls, including fax
messages, using the fax’s handset or an extension phone connected to the same
line.
FAX mode:
Select this mode when you only want to receive fax messages on your
line. The fax will answer all calls and receive incoming fax messages automatically.
Setting the reception mode
Set the mode of reception with the
RECEPTION MODE
key on the panel.
•
••
•
To select TAD, press the key until
"GENERAL OGM PLAY" appears in
the display ("TAD" will appear after the
general outgoing message plays).
•
••
•
To select TEL, press the key until
"TEL" appears in the display.
•
••
•
To select FAX, press the key until
"FAX" appears in the display.
Note:
TAD mode cannot be selected unless a general outgoing message has
been recorded as described in "Answering Machine Set-up" in this chapter.
RECEPTION
MODE
FUNCTION
RESOLUTION
FO-1850 only: Selecting the receiving unit
If you have connected the FO-1850 to a personal computer with the provided PC
interface box, you can choose whether to have incoming faxes received by the
FO-1850 or by your computer. The initial setting is "FAX" (reception by the
FO-1850). To change the setting, follow the steps below.
For detailed information on how faxes will be received if you choose reception by
your computer, see "PC reception" in "Receiving Documents" in Chapter 3.
1
Press the
FUNCTION
key and the "
#
"
key. "RECEIVE UNIT" will appear in the
display.
2
Press "
1
" (FAX) to select the FO-1850,
or "
2
" (PC) to select your computer.
FUNCTION
1
or
2
2-8 INITIAL SETTINGS