Filter
Top Products
UX1000U-IPSN
RT
<P=001>
ENTERING YOUR NAME AND FAX NUMBER
To have your name and fax/telephone number (called the "Sender’s name" and
"Sender’s number") printed at the top of every page you transmit, program them by
pressing the panel keys as shown below.
♦
You must program your name and fax number in order to comply with the
Consumer Protection Act of 1991 (see inside of front cover).
♦
If you enter an incorrect number or letter, press the
HOLD/SEARCH
key to
move the cursor back to the mistake, then enter the correct number or letter. (To
move the cursor forward, press the
SPEAKER
key.)
1
Press the keys shown at left. "ENTRY
MODE" will appear in the display.
2
Press the "
#
" key 2 times. "OWN NUM-
BER SET" will appear in the display.
3
Press the
START
key.
4
Enter your fax number (max. of 20 dig-
its) by pressing the number keys. (To in-
sert a space between digits, press the
"
#
" key. To insert a "
+
", press the "*"
key.)
(Example)
5
Press the
START
key.
6
Enter your name by pressing the appro-
priate number keys as shown on the fol-
lowing page. Press each key repeatedly
until the desired letter appears in the dis-
play. (Max. of 24 characters.)
(Example: "SHARP")
7
Press the
START
key and then the
STOP
key.
STOP
START
7 7
START
5
5
5
4
3
2
1
FUNCTION
3
START
7
7
7 7
4 4 4
2
2
7 7 7 7
SPEAKER
7
2-4 INITIAL SETTINGS