Filter
Top Products
FO1650U-UAOF
YF
<P=001>
OTHER FUNCTIONS
Transfer function
The Transfer function is used to make the FO-1650/1850 automatically call you at a
specified number every time it receives an incoming message in a selected box.
This allows you to hear your messages immediately after they come in, even when
you are at a remote location.
When you answer the telephone, you will hear your recorded message telling you
that the call is a transfer call. Enter "
#
", the box number, the box’s passcode (or
your remote code number if the box has no passcode), and "
#
". The FO-1650/1850
will then play back your messages. You can also perform any of the remote
operations described in the previous section.
Note: When you hang up after a transfer call, the FO-1650/1850 will not immedi-
ately resume normal operation. If you want the FO-1650/1850 to accept
calls immediately after a transfer call, enter "*" twice before hanging up (if
you want to hang up during message playback, first enter " 0" and " #" to
stop playback, then enter "*" twice).
Programming the transfer number
To use the Transfer function, you must first give the FO-1650/1850 the number to
call (the transfer number). This is done by pressing the panel keys as follows:
1
Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
2
Press the keys shown at left. "TRANS-
FER # ENTRY" will appear in the display.
3
Press the
START
key.
4
Enter a transfer number (max. of 32 dig-
its including pauses) by pressing the
number keys.
5
Press the
START
key and then the
STOP
key.
0
START
FUNCTION
STOP
5 5
5
1
2
3
4
START
(Example)
USING THE ANSWERING MACHINE 4-13