Filter
Top Products
(Example)
(Example)
<P=003>
Retrieving your messages
Follow the steps below to listen to your messages from a remote location. Note that
you can only access one box per call; if you want to access more than one box, you
must make a separate call for each box.
Note: You can also access the FO-1650/1850 for remote operation when the re-
ception mode is set to FAX. In this case, call the FO-1650/1850, press the
"#" key immediately after it answers (before you hear the fax tone), and then
continue from Step 2 below.
1
Call the FO-1650/1850 from a touch-
tone telephone. When your outgoing
message begins, press the "
#
" key on
the telephone.
•
••
•
You will hear a short beep, and the
outgoing message will stop.
2
Enter the number of the box you want to
listen to. If you want to listen to the Gen-
eral Box, skip this step.
3
Enter the box’s passcode, or your re-
mote code number if the box does not
have a passcode. When finished, press
"
#
" on the telephone.
•
••
•
You will hear a series of beeps equal
to the number of messages recorded
in the box, or one long beep if four or
more messages have been received.
The machine will then play back the
messages, beeping once at the end of
each message. When all messages
have been played back, you will hear
a long beep.
2
2
2
5
REMOTE OPERATIONS
USING THE ANSWERING MACHINE 4-7