Filter
Top Products
<P=003>
Optional reception settings
2 in 1 Print
To save paper, you can have the size of your incoming faxes reduced by 55%. This
will allow you to receive, for example, a 2-page document on one page (note that
this may not be possible if the document pages are longer than your printing
paper). To turn on this function, follow the steps below.
1
Press the keys shown at left. "2 IN 1
PRINT" will appear in the display.
2
Press "
1
" to turn on the function, or "
2
"
to turn it off.
3
Press the
STOP
key.
Reception Ratio
Your fax has been set at the factory to automatically reduce the size of received
documents to fit the size of the printing paper. This ensures that data on the edges
of the document are not cut off. If desired, you can turn this function off and have
received documents printed at full size.
Note: If a document is too long to fit on the printing paper, the remainder will be
printed on a second page. In this case, the cut-off point may occur in the
middle of a line.
Note: Automatic reduction may not be possible if the received document is too
large, contains too many fine graphics or images, or is sent at high resolu-
tion. In this case, the remainder of the document will be printed on a second
page.
1
Press the keys shown at left. "RECEP-
TION RATIO" will appear in the display.
2
Press "
1
" to turn automatic reduction on,
or "
2
" to turn it off.
3
Press the
STOP
key.
or
FUNCTION
6
1
2
or
1
2
FUNCTION
6
STOP
STOP
RECEIVING DOCUMENTS
FAX OPERATIONS 3-13