Filter
Top Products
<P=005>
Batch Page Numbering
This setting is used to change the page numbering of the transmitted document
from simple numbering ("P.1", "P.2", etc.) to batch numbering, which means that a
slash and the total number of pages being sent are added after each page number
(for example, "P. 1/5", "P.2/5", etc.). This allows the receiver to check for any
missing pages.
♦
If you are sending a cover sheet,
do not
include the cover sheet in the total
number of pages. Your fax will adjust the number to include the cover sheet
automatically.
♦
If you need to cancel a batch number entry, remove the document from the
feeder or press the
STOP
key.
♦
If the number of pages actually transmitted does not coincide with the batch
number entered, the alarm will sound and PAGE COUNT ERROR will appear in
the display. "PAGE E" will also appear in the "NOTE" column of the Transaction
Report if it has been set to print out.
1
Press the keys shown at left. "PAGE
COUNTER SET" will appear in the dis-
play.
2
Enter the total number of pages ("01" to
"99") by pressing the number keys.
(Example)
0
1
FUNCTION
SENDING DOCUMENTS
FAX OPERATIONS 3-5