Filter
Top Products
UX1300U-SFTI
YF
<P=001>
TIMER OPERATIONS
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at any one time, and the times they will be performed
can be specified up to 24 hours in advance.
You can use this function, for example, to take advantage of lower nighttime
telephone rates without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press the keys shown at left. "TIMER
MODE" will appear in the display.
1
FUNCTION
2
Press "
#
" to set a transmission operation
(SEND MODE), or "
*
" to set a polling
operation (POLLING MODE).
or
3
Press "
1
" to select SET.
4
Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
(Example: 9:25)
5
Press "
*
" to select A.M., or "
#
" to se-
lect P.M.
or
6
Press the
START
key.
1
0
9
2
5
START
SPECIAL FUNCTIONS 7-13