Filter
Top Products
Call Restriction
98
Activating Call Restriction
Follow the steps below to activate Call Restriction.
♦ To activate Call Restriction, at least one stored destination must be
permitted to be used.
1 Press , then until [CALL RESTRICTION] appears.
• If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2 Press .
Display: [ACT. CALL RESTRICT]
3 Press (ON) to activate Call Restriction, or (OFF) to deactivate
Call Restriction.
4 Press to exit.
SECURE
SECURE
START
STOP
When Call Restriction is activated
When Call Restriction is activated, after the user specifies the destination by
pressing a Rapid Key, entering a Speed Dial number, or searching, the
machine will check whether or not the number is permitted to used.
♦ If the destination is permitted to be used, [APPROVED] will briefly appear
and the machine will perform the transmission.
♦ If the destination is not permitted to be used, [NOT APPROVED] will briefly
appear. Remove the document from the feeder and ask your administrator
about the destination.
Note: The permission setting is associated with the stored fax number or e-
mail address itself; not with the Rapid Key or Speed Dial number in which the
number or address is stored.