Filter
Top Products
Authorized Transmission
92
Using the operation panel to edit and delete supervisors
Follow the steps below if you need to edit the information stored for a
supervisor or delete a supervisor.
1 Press , then until [AUTH. TRANSMISSION]
appears.
• If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2 Press , then until [AUTHORIZED APPROVER] appears.
3 Press .
4 Press or until the supervisor that you wish to edit or delete
appears and press .
5 Press for “EDIT” or for “CLEAR”.
• If you selected “CLEAR”, go to Step 9.
SECURE
SECURE
START
8 Press .
9 Return to Step 4 to store another supervisor, or press to exit.
START
STOP