Sharp FO-IS125N Fax Machine User Manual


 
Administrator Code
72
Administrator Code
The security functions can only be set up and changed by the administrator of
the machine. To access the security functions, the administrator must enter
the administrator code.
The administrator code has been set to “00000000” at the factory. It is
strongly recommended that the administrator of the machine change
the administrator code to a code that only he or she knows. To change
the administrator code, follow the steps below.
1 Hold down until [ADMIN CODE SETUP] / [PRESS
START KEY] appears in the display.
2 Press .
Display: [ENTER OLD CODE]
3 Enter the current administrator code.
If you are setting the code for the first time, enter 00000000.
To clear a mistake, press .
4 Press .
5 Enter the new code that you wish to use (any number from 5 to 8 digits).
6 Press . The code will be printed out.
Take care not to lose the print-out or forget the code. In the event that you
forget the code and have kept no record, contact your dealer.
If [USE ANOTHER CODE] appears, the code you entered is already being
used for one of the other security functions. Enter a different code.
SECURE
START
DEL
START
START