Filter
Top Products
Administrator Code
73
5. Security
Functions
Password protection for the Web page
To require that users enter a password in order to access the machine’s Web
page, open the Web page (see page 32) and click Passwords in the menu
frame. The Password Setup screen will appear.
Enter a password for regular users under User Password, and enter an
administrator password under Admin Password.
♦ The default administrator password is “Sharp”. It is strongly
recommended that the administrator of the machine change the
administrator password to a password that only he or she knows.
Note: The administrator password for the Web page is separate from the
admininstrator code for the security functions described on page 72.
If you only wish to prevent users from accessing the settings under Device
Setup in menu frame of the Web page, select “Enable password protection
of pages under Device Setup”. In this case, users can access all settings
other than the Device Setup settings without entering a password (it is not
necessary to set a password under User Password as explained above). To
access the Device Setup settings, the administrator password must be
entered.
If you wish to require that users enter the user password in order to access
the Web page, select “Enable password protection of this Website“. In this
case as well, only the administrator can access the Device Setup settings.
If you select “Disable Password”, anyone can freely access the Web page,
including the settings under Device Setup.
In Old Admin Password at the bottom of the screen, enter the old
administrator password. If you are setting passwords for the first time, enter
the default administrator password “Sharp”.
When finished, click Submit to save your settings.