Sharp FO-IS125N Fax Machine User Manual


 
Basic Setup
15
1. Installation
Comments:
The machine does not have a power on/off switch. The power is turned on
and off by simply plugging in or unplugging the power cord.
Whenever you unplug the power cord, wait at least 5 seconds before
plugging it back in.
If your area experiences a high incidence of lightning or power surges, it is
recommended that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
After inserting
the tray, flip out
the extension
Attach the document exit tray.
Connecting the power cord
Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) outlet.
Do not plug the power cord into any other kind of outlet. This will damage
the machine and is not covered under the warranty.