Sharp FO-IS125N Fax Machine User Manual


 
Receiving Faxes to E-mail/Folder
121
8. Special
Functions
3 Press to select “SET”.
To clear a previously stored group, press .
4 Enter a 2-digit number from “01” to “30” (this number is used to identify
the group you will store).
If you are clearing a group, enter the 2-digit number of the group you wish
to clear and go to Step 8
5 Enter the originating fax number.
If you wish to have faxes from all originating fax numbers forwarded (“ALL
TRANSFER”), go directly to Step 6 without entering a fax number.
6 Press .
7 Specify the destination (e-mail address, network folder, or FTP server)
to which you wish to have the faxes forwarded using one of the methods
below:
Rapid Key Dialing: Press a Rapid Key.
Speed Dialing: Press and enter a 3-digit Speed Dial number.
Search Dialing: Press or until the destination appears in the
display.
8 Press . The group is stored.
If [NETWORK FOLDER/FTP IS ALREADY USED] appears, the same
originating fax number (or “ALL TRANSFER”) has already been stored in a
group with a network folder or FTP forwarding destination. In this case, only
an e-mail address can be stored for the forwarding destination.
START
SPEED DIAL
START