Filter
Top Products
Authorized Transmission
90
Using the Web page to configure Authorized Transmission
settings
To open the Authorized Transmission settings, click Authorized
Transmission in the menu frame. The following screen will appear.
Set Authorized Transmission to Enable and select the type of operation
that you wish to be authorized in Operation to be authorized.
In Notice to the sender, select when an e-mail is sent to the user to inform
him or her of the supervisor’s decision and the status of the transmission.
In Automatic elimination of the image which hasn’t been authorized yet,
you can select a time after which a transmission will be canceled if no
response is received from the supervisor.
At the bottom of the screen, enter the e-mail addresses of supervisors that
are authorized to check transmissions (up to three e-mail addresses can be
entered; the user will select one of the supervisors at the time of
transmission).
When finished, click submit.