Filter
Top Products
Send Hold Function (Fax Only)
100
Send Hold Function (Fax Only)
To ensure that a fax is not accidentally sent to the wrong fax number when
you use automatic dialing, this function displays the fax number (or the name
stored for the fax number) that you entered and prompts you to confirm that it
is correct. After you check the number, press to begin dialing and
transmission.
♦ Send Hold will not operate if the handset is lifted or is pressed
before dialing.
Activating (or deactivating) the Send Hold function
START
SPEAKER
1 Press , then until [SEND HOLDING] appears.
• If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2 Press .
Display: [ACT. SEND HOLDING]
3 Press (ON) to activate Send Hold.
(Press (OFF) to deactivate Send Hold.)
4 Press to exit.
SECURE
SECURE
START
STOP