Filter
Top Products
Call Restriction
96
Call Restriction
To ensure that a fax or e-mail message is not accidentally sent to the wrong
destination because of a mistake made while dialing the fax number or
entering the e-mail address, the Call Restriction function
1) only allows a destination that has been stored in a Rapid Key or Speed Dial
number to be used for transmission (direct entry of full fax numbers and e-
mail addresses is not allowed) and,
2) checks whether or not the Rapid Key or Speed Dial number specified by
the user at the time of transmission has been permitted for use by the
administrator. If the number or address has not been permitted for use, the fax
or e-mail message will not be sent.
Note: When Call Restriction is activated, a voice number cannot be dialed
unless it is stored in a Rapid Key or Speed Dial number and is permitted for
use. For this reason, it is recommended that emergency numbers be stored in
Rapid Keys or Speed Dial numbers.
To use this function, the administrator must specify the Rapid Keys and Speed
Dial numbers that are permitted to be used, and then activate the function.
Permitting stored destinations to be used
Use this procedure to permit a previously stored Rapid Key or Speed Dial
number to be used.
♦ This procedure can only be used to permit Rapid Keys or Speed Dial
numbers to be used. If you need to cancel the permission setting of a Rapid
Key or Speed Dial number, edit the key or number as explained on page
99.
1 Press , then until [CALL RESTRICTION] appears.
• If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
SECURE
SECURE
START