Filter
Top Products
A
CCESS
C
ONTROL
L
ISTS
3-71
Command Attributes
• Src/Dst IP – Specifies the source or destination IP address. Use
“Any” to match any address, “Host” to specify a host address (not a
subnet), or “IP” to specify a range of addresses. (Options: Any, Host,
IP; Default: Any)
• Src/Dst IP Bitmask – Source or destination address of rule must
match this bitmask. (See the description for SubMask on page 3-62.)
• Protocol Bitmask – Check the protocol field.
• Service Type – Check the rule for the specified priority type.
(Options: Precedence, TOS, DSCP; Default: TOS)
• Src/Dst Port Bitmask – Protocol port of rule must match this
bitmask. (Range: 0-65535)
• Control Bitmask – Control flags of rule must match this bitmask.
(Range: 0-63)