Filter
Top Products
F
LASH
/F
ILE
C
OMMANDS
4-91
Command Usage
• If you enter the command dir without any parameters, the system
displays all files.
• File information is shown below:
Example
The following example shows how to display all file information.
whichboot
This command displays which files were booted when the system powered
up.
Default Setting
None
Command Mode
Privileged Exec
Table 4-25 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config
file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -----------
diag_0060 Boot-Rom image Y 111360
run_01642 Operation Code N 1074304
run_0200 Operation Code Y 1083008
Factory_Default_Config.cfg Config File N 2574
startup Config File Y 2710
-------------------------------------------------------------------
Total free space: 0
Console#