Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-200
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Admin State Administrative values of the partner’s state parameters.
(See preceding table.)
Oper State Operational values of the partner’s state parameters.
(See preceding table.)
Console#show lacp sysid
Port Channel System Priority System MAC Address
-------------------------------------------------------------------
1 32768 00-30-F1-8F-2C-A7
2 32768 00-30-F1-8F-2C-A7
3 32768 00-30-F1-8F-2C-A7
4 32768 00-30-F1-8F-2C-A7
5 32768 00-30-F1-8F-2C-A7
6 32768 00-30-F1-8F-2C-A7
Console#
Table 4-49 show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority* LACP system priority for this channel group.
System MAC Address* System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID
.
Table 4-50 Address Table Commands
Command Function Mode Page
mac-address-table
static
Maps a static address to a port in
a VLAN
GC 4-201
clear
mac-address-table dynamic
Removes any learned entries
from the forwarding database
PE 4-202
Table 4-48 show lacp neighbors - display description (Continued)
Field Description