Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-146
Command Usage
• You must configure an ACL mask before you can map CoS values to
the rule.
• A packet matching a rule within the specified ACL is mapped to one
of the output queues as shown below.
Example
Related Commands
queue cos-map (4-259)
show map access-list mac (4-146)
show map access-list mac
This command shows the CoS value mapped to a MAC ACL for the
current interface. (The CoS value determines the output queue for packets
matching an ACL rule.)
Syntax
show map access-list mac [interface]
interface
ethernet unit/port
• unit - This is device 1.
• port - Port number.
Command Mode
Privileged Exec
Table 4-36 Egress Queue Priority Mapping
Priority 01234567
Queue 12034567
Console(config)#int eth 1/5
Console(config-if)#map access-list mac M5 cos 0
Console(config-if)#