Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-192
• When an incomplete host name is received by the DNS server on this
switch and a domain name list has been specified, the switch will work
through the domain list, appending each domain name in the list to the
host name, and checking with the specified name servers for a match.
• When more than one name server is specified, the servers are queried
in the specified sequence until a response is received, or the end of the
list is reached with no response.
• Note that if all name servers are deleted, DNS will automatically be
disabled.
Command Attributes
• Domain Lookup Status – Enables DNS host name-to-address
translation.
• Default Domain Name
15
– Defines the default domain name
appended to incomplete host names. (Range: 1-64 alphanumeric
characters)
• Domain Name List
15
– Defines define a list of domain names that
can be appended to incomplete host names. (Range: 1-64 alphanumeric
characters. 1-5 names)
• Name Server List – Specifies the address of one or more domain
name servers to use for name-to-address resolution. (Range: 1-6 IP
addresses)
15. Do not include the initial dot that separates the host name from the domain name.