Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-60
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority
(i.e., numerically lower) than that specified for RAM.
Example
logging host
This command adds a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
Syntax
[no] logging host host_ip_address
host_ip_address - The IP address of a syslog server.
Default Setting
None
critical 2 Critical conditions (e.g., memory allocation,
or free memory error - resource exhausted)
alerts 1 Immediate action needed
emergencies 0 System unusable
Console(config)#logging history ram 0
Console(config)#
Table 4-17 Logging Levels (Continued)
Name Level Description
* There are only Level 2, 5 and 6 error messages for the current firmware release.