P
RIORITY
C
OMMANDS
4-255
Priority Commands (Layer 2)
switchport priority default
This command sets a priority for incoming untagged frames. Use the no
form to restore the default value.
Syntax
switchport priority default default-priority-id
no switchport priority default
default-priority-id - The priority number for untagged ingress traffic.
The priority is a number from 0 to 7. Seven is the highest priority.
Default Setting
The priority is not set, and the default value for untagged frames
received on the interface is zero.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Table 4-60 Priority Commands (Layer 2)
Command Function Mode Page
switchport priority
default
Sets a port priority for incoming untagged
frames
IC 4-255
queue mode Sets the queue mode to strict priority or
Weighted Round-Robin (WRR)
GC 4-257
queue bandwidth Assigns round-robin weights to the
priority queues
GC 4-258
queue cos map Assigns class-of-service values to the
priority queues
IC 4-259
show queue mode Shows the current queue mode PE 4-260
show queue
bandwidth
Shows round-robin weights assigned to
the priority queues
PE 4-260
show queue cos-map Shows the class-of-service map PE 4-261
show interfaces
switchport
Displays the administrative and
operational status of an interface
PE 4-180