Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-234
Related Commands
show vlan (4 -241)
Configuring VLAN Interfaces
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Table 4-54 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for
a specified VLAN
IC 4-234
switchport mode Configures VLAN membership mode
for an interface
IC 4-235
switchport
acceptable-frame-types
Configures frame types to be accepted
by an interface
IC 4-236
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-237
switchport native vlan Configures the PVID (native VLAN) of
an interface
IC 4-238
switchport allowed
vlan
Configures the VLANs associated with
an interface
IC 4-239
switchport gvrp Enables GVRP for an interface IC 4-251
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-240