Filter
Top Products
VLAN C
OMMANDS
4-231
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Editing VLAN Groups
Table 4-52 VLAN Commands
Command Groups Function Page
Editing VLAN Groups Sets up VLAN groups, including name, VID and
state
4-231
Configuring VLAN
Interfaces
Configures VLAN interface parameters,
including ingress and egress tagging mode,
ingress filtering, PVID, and GVRP
4-234
Displaying VLAN
Information
Displays VLAN groups, status, port members,
and MAC addresses
4-241
Configuring Protocol
VLANs
Configures protocol-based VLANs based on
frame type and protocol
4-242
Configuring Private
VLANs
Configures private VLANs, including uplink and
downlink ports
4-247
Table 4-53 Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 4-232
vlan Configures a VLAN, including VID,
name and state
VC 4-233