Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-268
show map ip port
Use this command to show the IP port priority map.
Syntax
show map ip port [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Related Commands
map ip port (Global Configuration) (4 -262)
map ip port (Interface Configuration) (4 -263)
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Eth 1/ 2 80 0
.
.
.
Eth 1/12 80 0
Console#