Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-80
• Forced Mode
3
– Shows the forced/preferred port type to use for
combination ports
9-12. (Copper-Forced, Copper-Preferred-Auto,
SFP-Forced, SFP-Preferred-Auto)
• Trunk Member
3
– Shows if port is a trunk member.
• Creation
4
– Shows if a trunk is manually configured or dynamically set
via LACP.
Web – Click Port, Port Information or Trunk Information.
Figure 3-36 Port - Port Information
Field Attributes (CLI)
Basic information:
• Port type – Indicates the port type.
(1000BASE-T or SFP)
• MAC address – The physical layer address for this port. (To access
this item on the web, see “Setting the Switch’s IP Address” on
page 3-17.)
Configuration:
• Name – Interface label.
• Port admin – Shows if the interface is enabled or disabled (i.e., up or
down).
3. Port Information only.
4. Trunk Information only.