Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-262
Example
Priority Commands (Layer 3 and 4)
map ip port (Global Configuration)
Use this command to enable IP port mapping (i.e., class of service
mapping for TCP/UDP sockets). Use the no form to disable IP port
mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Table 4-62 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP/UDP class of service
mapping
GC 4-262
map ip port Maps TCP/UDP socket to a class of
service
IC 4-263
map ip precedence Enables IP precedence class of service
mapping
GC 4-264
map ip precedence Maps IP precedence value to a class of
service
IC 4-265
map ip dscp Enables IP DSCP class of service
mapping
GC 4-266
map ip dscp Maps IP DSCP value to a class of service IC 4-266
show map ip port Shows the IP port map PE 4-268
show map ip
precedence
Shows the IP precedence map PE 4-269
show map ip dscp Shows the IP DSCP map PE 4-270