Filter
Top Products
Configuring the AP
AP-4131 Access Point Product Reference Guide 95
1. To access and enable the Kerberos configuration, select Configure
Kerberos
from the Special Functions Menu. The Configure Kerberos
Authentication screen displays:
Symbol Access Point
Configure Kerberos Authentication
Kerberos Enabled
KSS Port 34567
KSS Secret *******
KSS Name/IP Address ksssrv
*** If not using a KSS, please configure the following items.
KDC Server Name/IP Address krbtgt
Backup KDC Name/IP Address kdc2
Realm Name APFW.SYMBOL.COM
User ID ap3
Password *******
OK-[CR] Save-[F1] Cancel-[ESC]
Enable Kerberos
2. Verify the KSS port/name to enable Kerberos. Modify as needed.
3. Verify the KDC name.
Only enter a KDC Server Name/IP Address, Backup KDC Name/IP Address, Realm Name, User ID
and Password if not using a KSS.
The MU does not display the Kerberos login password screen if the wrong
KDC name is entered in the AP Authentication screen.
4. Verify the User ID matches the ESSID.