Filter
Top Products
Monitoring Statistics
160 AP-4131 Access Point Product Reference Guide
2. Configure the AP system settings as required:
Unit Name Identifies the AP name.
MAC Address (BSS) Identifies the unique 48-bit, hard-coded Media
Access Control address.
IP Address Identifies the network-assigned Internet Protocol
address.
Net_ID (ESS) Identifies the unique 32-character,
alphanumeric, case-sensitive network identifier.
Channel Identifies the direct-sequence channel used by
the access point. The channel used is within the
range required for the operating country.
Country Identifies AP country code that in turn determines
the AP direct-sequence channel range.
Antenna Selection Indicates if the AP is configured for Full
Diversity, Primary Only, Secondary Only,
or Rx
Diversity
.
Shared Key Enabled or Disabled indicates whether or not the
secret key used by the KSS and access point
(defined in the Configure Kerberos
Authentication window) is currently being used.
Kerberos Enabled or Disabled indicates whether or not the
Kerberos encryption algorithm is being used with
the access point.
EAP/TLS Enables Windows XP MUs to use EAP/TLS for
authentication using 40 or 128-bit WEP.
Key Width Displays the encryption algorithm key width
40-bit or 128-bit currently being used by the
access point
.
Start Flashing All
LEDs
Begins a test routine to check the LED
functionality and allows the user to determine
the AP location.
Reset AP Clears the APs statistics and restores the last
saved configuration.