Symbol Technologies AP-4131 Network Router User Manual


 
Configuring the AP
58 AP-4131 Access Point Product Reference Guide
5. In the Antenna Selection field, use the SPACE BAR or LEFT/RIGHT-
ARROW keys to toggle between
Full Diversity, Primary Only, Secondary
Only
, or Rx Diversity.
6. Select OK or Save to register settings by writing changes to NVM.
Selecting
Save displays a confirmation prompt.
7. Select Save ALL APs or press [F2] to save the AP installation
configuration information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP on the
Known APs table to update their configuration and reset after the
configuration has been modified. Users can perform this option only
among the same hardware platforms and firmware version.
Additional
Gateways
The IP address of the additional gateways used.
Access up to seven gateways.
DHCP/BOOTP Enables or Disables selection of DHCP/BOOTP.
The options are:
Enabled
DHCP and BOOTP interoperate,
whichever response the AP selects first
becomes the server allocating the
information.
DHCP Only
Only DHCP responses will be accepted
by the AP.
BOOTP Only
Only BOOTP responses will be accepted
by the AP. If both DHCP and BOOTP
services are required, do not selected
BOOTP Only.
Disabled
Disables BOOTP and DHCP; network
configuration is manually entered.