Filter
Top Products
Configuring the AP
44 AP-4131 Access Point Product Reference Guide
To ensure the Web Server option is enabled for the AP:
1. Access the UI using a Serial or Telnet connection.
2. From the Main Menu select System Configuration.
3. Verify the Web Server option on the System Configuration screen
is enabled.
4. Select Save-[F1] to save the configuration.
To reset the AP for changes to take effect.
1. Select the Special Functions screen.
2. Select Reset AP.
3. Select Yes at the confirmation prompt.
To enable Help file access, change the Help URL parameter:
1. Select the Special Functions screen
2. Press F3 to view the Firmware Functions Update Menu.
3. Use the TAB or UP/DOWN ARROW key to select the Alter Filename(s)/HELP
URL/TFTP Server
.
4. Press ENTER.
5. Use the TAB or DOWN ARROW key to select the .HELP URL field.
6. Type the IP address/URL (Universal Request Locator) of the Web server
and the directory/folder of the Web server for the Help file location.
http://
xxx.xxx.xxx.xxx/WebHelp
Where xxx.xxx.xxx.xxx is the IP address of the server.
7. Save the new setting by selecting Save-[F1] option.
8. Select Yes at the confirmation prompt.